Extrusion & Post
9 Aufrufe
EMA screw slippage
Problembeschreibung
Screw slippage during EMA extrusion with feed not advancing and output dropping sharply
Ursachenanalyse
EMA pellets melt too early in the feed section forming a lubricating film causing screw slippage; feed section temperature too high
Lösung
1) Lower feed section temperature by 10-15°C to delay melting; 2) Deepen feed section flights to increase gripping force; 3) Dry pellet surface to reduce lubrication
Wichtigste Erkenntnis
Screw slippage is caused by premature melting; lowering feed section temperature is key
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!