Molding Process
6 Aufrufe
EVA hardness is too low
Problembeschreibung
EVA product Shore hardness is 5-10 degrees lower than target, feels soft
Ursachenanalyse
EVA's soft nature with low hardness; too much plasticizer or softener added; low crystallinity
Lösung
1) Add 5-10wt% rigid filler to increase hardness; 2) Reduce plasticizer dosage; 3) Increase cooling rate to increase crystallinity
Wichtigste Erkenntnis
Low hardness is caused by material softness and excessive plasticization; adding filler is key
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!