Molding Process
4 visualizaciones
EVA hardness is too low
Fenómeno del problema
EVA product Shore hardness is 5-10 degrees lower than target, feels soft
Análisis de la causa
EVA's soft nature with low hardness; too much plasticizer or softener added; low crystallinity
Solución
1) Add 5-10wt% rigid filler to increase hardness; 2) Reduce plasticizer dosage; 3) Increase cooling rate to increase crystallinity
Conclusión clave
Low hardness is caused by material softness and excessive plasticization; adding filler is key
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!