Injection Molding
4 Aufrufe
CEF injection molded part has oil spots
Problembeschreibung
After demolding, oil spots appear on the surface of the CEF injection molded part, release agent residue or lubricant exudation
Ursachenanalyse
Too much release agent sprayed or unevenly distributed; the internal lubricant of CEF, stearic acid type, exudes to the surface; mold lubricating oil seeps into the cavity
Lösung
1) Reduce the amount of release agent or switch to dry film release agent; 2) Use internal lubricant instead of external release agent; 3) Seal the lubricated parts of the mold to prevent oil from seeping into the cavity; 4) Clean the surface of the part to remove oil spots and then detect the source
Wichtigste Erkenntnis
Oil spots are caused by external sources of release agent and lubricant; reducing release agent and sealing mold lubrication are the key
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!