Injection Molding
5 조회수
CEF injection molded part has oil spots
문제 현상
After demolding, oil spots appear on the surface of the CEF injection molded part, release agent residue or lubricant exudation
원인 분석
Too much release agent sprayed or unevenly distributed; the internal lubricant of CEF, stearic acid type, exudes to the surface; mold lubricating oil seeps into the cavity
해결 방법
1) Reduce the amount of release agent or switch to dry film release agent; 2) Use internal lubricant instead of external release agent; 3) Seal the lubricated parts of the mold to prevent oil from seeping into the cavity; 4) Clean the surface of the part to remove oil spots and then detect the source
핵심 요약
Oil spots are caused by external sources of release agent and lubricant; reducing release agent and sealing mold lubrication are the key
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!