Injection Molding
3 Aufrufe
PETG '2079851475616104452 screw speed too high, gasification
Problembeschreibung
Excessive screw speed causes melt shear overheating, bubbles and degradation.
Ursachenanalyse
Excessive screw speed produces a large amount of shear heat, exceeding the PETG thermal stability limit.
Lösung
Reduce the screw speed to a reasonable range of 50-100rpm; use back pressure to discharge gas.
Wichtigste Erkenntnis
PETG screw speed should be as low as possible under the premise of ensuring plasticization.
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!