Problem & Lösung

Praktische Antworten auf häufige Herausforderungen mit Kunststoffmaterialien

Artikel durchsuchen →

Creep Deformation of general purpose polystyrene Products

Creep is the slow deformation of amorphous materials under continuous load.

Material Analysis creepcontinuous loadwall thickness designmolecular weightglass fiber reinforcement

Unevenness on the Surface of general purpose polystyrene Extruded Sheets

Extrusion & Post unevennesssheetsgeneral purpose polystyreneextrusion moldingsurface quality

Poor Electroplating Bonding Force of general purpose polystyrene ABS Products

ABS electroplating quality is closely related to the material grade and internal stress.

Thermoforming electroplating bonding forceABSinternal stresselectroplating graderelease agent

Insufficient Weather Resistance/Yellowing of general purpose polystyrene ASA Products

Material Analysis weather resistanceyellowingASAultravioletprocessing temperature

Stress Whitening Appearing at the Ejector Pin Position of general purpose polystyrene Injection Molded Products

Injection Molding stress whiteningejector pin positiongeneral purpose polystyrene'2079851475616104452process optimization

Surface Static Electricity Problem of acrylonitrile-styrene-acrylate copolymer Products

The static electricity problem is caused by the high insulation of the material.

Molding Process static electricityantistatic agentvolume resistanceambient humiditysurface treatment

Insufficient Welding/Fusion Strength of acrylonitrile-styrene-acrylate copolymer Products

The welding strength is determined by the melt fusion quality.

Material Drying welding strengthwelding temperaturewelding pressuresurface cleaningmelt fusion

Dimensional Change with Temperature/Thermal Expansion of acrylonitrile-styrene-acrylate copolymer Products

Production & Quality thermal expansiondimensional changetemperature influencethermal expansion coefficientdesign compensation

Shrinkage Rate Prediction Deviation of acrylonitrile-styrene-acrylate copolymer Products

Molds & Tooling shrinkage ratemold designwall thickness influenceflow directionmold trial verification

Creep Deformation of acrylonitrile-styrene-acrylate copolymer Products

Creep is the slow deformation of amorphous materials under continuous load.

Material Analysis creepcontinuous loadwall thickness designmolecular weightglass fiber reinforcement

Zurück 1 ... 30 31 32 33 34 35 36 ... 1164 Weiter