메뉴
재료 기계
인사이트
기사 동영상 문제 및 해결책
About
Chembull 소개 미디어 파트너
문의하기
언어
EnglishالعربيةPortuguêsEspañolDeutschTürkçe한국어

문제 및 해결책

일반적인 플라스틱 재료 문제에 대한 실질적인 답변

기사 둘러보기 →
11636 질문
Q
Creep Deformation of general purpose polystyrene Products
A
Creep is the slow deformation of amorphous materials under continuous load.
Material Analysis creepcontinuous loadwall thickness designmolecular weightglass fiber reinforcement
9 조회수
전체 답변 읽기 →
Q
Unevenness on the Surface of general purpose polystyrene Extruded Sheets
A
Extrusion surface defects need to be controlled from three aspects: temperature, speed, and die condition.
Extrusion & Post unevennesssheetsgeneral purpose polystyreneextrusion moldingsurface quality
9 조회수
전체 답변 읽기 →
Q
Poor Electroplating Bonding Force of general purpose polystyrene ABS Products
A
ABS electroplating quality is closely related to the material grade and internal stress.
Thermoforming electroplating bonding forceABSinternal stresselectroplating graderelease agent
13 조회수
전체 답변 읽기 →
Q
Insufficient Weather Resistance/Yellowing of general purpose polystyrene ASA Products
Q
Stress Whitening Appearing at the Ejector Pin Position of general purpose polystyrene Injection Molded Products
A
This problem needs to be systematically solved from three aspects: material characteristics, process parameters, and mold conditions.
Injection Molding stress whiteningejector pin positiongeneral purpose polystyrene'2079851475616104452process optimization
9 조회수
전체 답변 읽기 →
Q
Surface Static Electricity Problem of acrylonitrile-styrene-acrylate copolymer Products
A
The static electricity problem is caused by the high insulation of the material.
Molding Process static electricityantistatic agentvolume resistanceambient humiditysurface treatment
9 조회수
전체 답변 읽기 →
Q
Insufficient Welding/Fusion Strength of acrylonitrile-styrene-acrylate copolymer Products
A
The welding strength is determined by the melt fusion quality.
Material Drying welding strengthwelding temperaturewelding pressuresurface cleaningmelt fusion
9 조회수
전체 답변 읽기 →
Q
Dimensional Change with Temperature/Thermal Expansion of acrylonitrile-styrene-acrylate copolymer Products
A
Thermal expansion is an inherent characteristic of the material, and the temperature influence needs to be considered in the design.
Production & Quality thermal expansiondimensional changetemperature influencethermal expansion coefficientdesign compensation
9 조회수
전체 답변 읽기 →
Q
Shrinkage Rate Prediction Deviation of acrylonitrile-styrene-acrylate copolymer Products
A
Shrinkage rate prediction needs to be comprehensively determined in combination with material characteristics, product structure, and process parameters.
Molds & Tooling shrinkage ratemold designwall thickness influenceflow directionmold trial verification
9 조회수
전체 답변 읽기 →
Q
Creep Deformation of acrylonitrile-styrene-acrylate copolymer Products
A
Creep is the slow deformation of amorphous materials under continuous load.
Material Analysis creepcontinuous loadwall thickness designmolecular weightglass fiber reinforcement
9 조회수
전체 답변 읽기 →
이전 1 ... 30 31 32 33 34 35 36 ... 1164 다음

카테고리

전체 주제 11636 Material Drying 1439 Injection Molding 1506 Molding Process 740 Molds & Tooling 1506 Processing Machinery 2025 Extrusion & Post 2239 Blow Molding 315 Thermoforming 141 Material Analysis 1343 Production & Quality 382
ChemAI