Injection Molding
3 visualizaciones
LDPE Mold Temperature Uniformity
Fenómeno del problema
LDPE injection molded parts shrink inconsistently at various locations and warp.
Análisis de la causa
Uneven mold cooling causes differences in crystallization shrinkage; During on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience; This mechanism has been repeatedly verified by industry literature and should be confirmed first during troubleshooting.
Solución
Equalize water channels; cavity temperature difference ±5℃; strengthen water channels at thick walls; After adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability; Change only one variable at a time and record parameter changes to facilitate locating effective measures.
Conclusión clave
Warpage is controlled by cooling uniformity; After confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; Incorporate this case into the defect archive as a troubleshooting reference for similar future problems.
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!