Processing Machinery
8 visualizaciones
LDPE and LLDPE Blending
Fenómeno del problema
Output decreases when processing pure LLDPE on old equipment, improves after blending with LDPE but performance is compromised
Análisis de la causa
Low-power old equipment is limited in output by the high viscosity of LLDPE; blending more than 15-20% LLDPE into LDPE also reduces output; raising the barrel zone 2 temperature can sometimes eliminate the problem
Solución
① Use LDPE/LLDPE blending as a transition on old equipment; ② appropriately raise the barrel zone 2 temperature; ③ the long-term solution is equipment upgrading rather than formulation compromise; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
Conclusión clave
LDPE and LLDPE blending is a balancing act between equipment and performance; temperature compensation is an emergency measure, equipment upgrading is the radical cure; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!