Material Drying
8 visualizaciones
PA6 High Water Content Scenario 0.1%
Fenómeno del problema
Optical-grade PA6 products still show tiny bubbles even when dried to 0.2% moisture content
Análisis de la causa
In high-requirement occasions such as optical and thin-walled transparent products, the trace amount of water vapor released at 0.2% moisture content is still enough to form visible bubbles in the cavity, and the moisture content needs to be pressed below 0.1%
Solución
The drying moisture content of high-requirement products is controlled at 0.1%: dehumidifying dryer dew point -40°C, temperature 90°C, time extended to 6-8 hours, and confirmed by actual measurement with the Karl Fischer method
Conclusión clave
Drying standards for high-requirement occasions must be raised accordingly; 0.1% moisture content is the threshold for optical-grade PA6; after confirming effectiveness, fix the parameters and practices into the work instructions to prevent recurrence
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!