Material Drying
7 visualizaciones
PBT Poor Metering
Fenómeno del problema
Product weight fluctuates, metering is unstable, and screw back time is sometimes long and sometimes short
Análisis de la causa
PBT has good fluidity; unstable back pressure or check valve leakage causes metering fluctuations; changes in the drying state of the pellets affect plasticization; increased screw wear clearance is also a cause; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience
Solución
①Set back pressure stably; ②Overhaul the check valve and screw wear; ③Standardize the drying state of the pellets; after adjustment, take samples continuously to verify the effect, and resume mass production only after confirming stability
Conclusión clave
PBT poor metering is investigated along three lines: back pressure, check valve, and drying; equipment wear is a chronic variable; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!