Material Drying
8 visualizaciones
PC Silver Streak Multi-Cause Troubleshooting
Fenómeno del problema
[Problem Phenomenon] PC product silver streaks recur, and single machine adjustment cannot cure them
Análisis de la causa
The main cause of PC silver streaks is moisture, but degradation from excessive melt temperature, shear overheating and material contamination also cause silver streaks; classify and locate by distribution position: random all-over distribution indicates moisture, fixed at the gate indicates shear
Solución
First verify the moisture content ≤0.02%; then check the melt temperature and shear; for gate-fixed silver streaks, reduce the speed and enlarge the gate; after adjustment, take samples continuously to verify the effect, and resume mass production only after confirming stability
Conclusión clave
PC silver streaks divide into three routes of moisture, heat and shear, and the distribution position points to the cause; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!