Processing Machinery
7 visualizaciones
PPO Blow Molded Large Parts
Fenómeno del problema
[Problem Phenomenon] Large hollow parts need to reduce processing cost while maintaining performance
Análisis de la causa
PPE/HIPS flame-retardant grades can be blow molded to reduce processing cost; large parts of business equipment are a typical scenario; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience
Solución
Evaluate PPE/HIPS '2079851475616104457 for large hollow parts; select grades with melt strength; control wall thickness uniformity in the process; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
Conclusión clave
PPO-series '2079851475616104457 reduces cost, a process option for large hollow parts; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!