Injection Molding
7 visualizaciones
EVOH injection mold venting burnt
Fenómeno del problema
EVOH injection mold venting insufficient, air in the cavity compressed and heated, causing local burning
Análisis de la causa
Insufficient vent groove area or improper position; injection speed too fast with air unable to escape in time; air compressed to high temperature >200°C causing oxidative burning
Solución
1) Increase vent groove area, depth 0.02-0.03mm, width 5-10mm; 2) Set vent grooves in the last-filled area of the melt; 3) Reduce injection speed to reduce air compression; 4) Multi-stage injection with slow advance for venting
Conclusión clave
Burning is caused by insufficient venting and high-speed injection compressing air; increasing venting and reducing speed are key
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!