Material Analysis
15 visualizaciones
Middle zone temperature fluctuation causes unstable melt viscosity
Fenómeno del problema
Middle zone temperature fluctuation causes unstable melt viscosity
Análisis de la causa
Middle zone temperature too high, local degradation
Middle zone temperature low, insufficient plasticization
Unreasonable temperature difference setting between middle zone and front zone
Temperature control system responds slowly in the middle zone
Middle zone temperature setting affects melt uniformity
Solución
Reasonably set the middle zone temperature to the middle value of the 170-230°C range
Ensure the middle zone temperature is 10-15°C higher than the rear zone
Stabilize middle zone temperature control
Set the middle zone temperature according to the cellulose acetate butyrate melting curve
Calibrate the middle zone temperature control system
Conclusión clave
Middle zone temperature needs to ensure uniform melt plasticization
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!