Injection Molding
2 visualizaciones
Flow Marks in CMC '2079851475616104452
Fenómeno del problema
Radial flow marks centered on the gate appear on the surface of CMC injection molded products
Análisis de la causa
Injection speed is too fast, causing unstable melt front; mold temperature is too low <30°C and the front cools rapidly to form marks
Solución
1)Adopt multi-stage injection speed slow-fast-slow to control front stability; 2)Increase mold temperature to 40-50°C to delay front cooling; 3)Stabilize injection pressure to avoid fluctuations; 4)Increase gate area to reduce sudden pressure change at the gate
Conclusión clave
Flow marks are caused by unstable injection front and rapid cooling; multi-stage injection and high mold temperature are the key
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!