Processing Machinery
8 visualizaciones
Poor plasticization caused by screw wear of low density polyethylene extruder
Fenómeno del problema
Unmelted particles appear in products, surface is rough, plasticizing quality decreases.
Screw wear weakens shear and mixing effects, making melt quality unstable.
Análisis de la causa
(1) Long-term screw wear, increased clearance between flight and barrel
(2) Hard fillers in raw material accelerate wear
(3) Insufficient wear resistance of screw material
(4) Screw rotation speed too high accelerates wear
(5) Improper barrel temperature setting, local overload
Solución
(1) Check screw wear; repair or replace if clearance exceeds 0.2mm
(2) Select wear-resistant screw material or bimetallic screw
(3) Reduce screw rotation speed for filled raw materials
(4) Optimize barrel temperature settings, ensure each zone at a reasonable value within the 160-220°C range
(5) Regularly maintain the screw, clean deposits on the screw surface
Conclusión clave
Screw wear causes decreased plasticizing efficiency; it needs to be solved by selecting wear-resistant materials and regular maintenance.
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!