Injection Molding
15 visualizaciones
Improper Screw Speed of PBT '2079851475616104452 Machine
Fenómeno del problema
An excessively high screw speed causes excessive shear heat and degradation, while an excessively low speed causes insufficient plasticization and uneven product quality.
Análisis de la causa
The screw speed is not optimized according to the characteristics of PBT and the glass fiber content; the general setting is not suitable.
Solución
For PBT reinforced material, the recommended screw speed is 50-80rpm; reduce the back pressure to reduce shear heat; monitor the melt temperature.
Conclusión clave
The PBT screw speed needs to balance plasticization and shear heat.
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!