Injection Molding
8 visualizaciones
Flow marks/water wave marks on product surface
Fenómeno del problema
Concentric circular or arc-shaped ripples appear on the surface, spreading like water waves, with irregular distribution
Análisis de la causa
The melt flow front temperature is too low, causing repeated solidification and re-melting; the injection speed curve fluctuates; mold temperature is too low
Solución
Increase melt temperature by 5-15°C and mold temperature; use a slow-fast-slow three-stage injection speed curve; enlarge gate size
Conclusión clave
Flow marks reflect the unstable state of melt front filling
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!