Molds & Tooling
30 visualizaciones
PI compression molding and sintering product cracks
Fenómeno del problema
PI compression molded and sintered parts crack
Análisis de la causa
Uneven density of the preformed green body; internal-external temperature difference during sintering causes stress; demolding temperature too high
Solución
Optimize preforming pressure uniformity; reduce the heating rate; control the cooling rate
Conclusión clave
The heating and cooling control of PI sintering is the key to preventing cracking
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!