Problema y solución

Q

Haul-off speed mismatch of heat-resistant polyethylene extruded products (Variant: mass production scenario)

A

Haul-off speed mismatch needs to be solved by precisely adjusting haul-off parameters and ensuring haul-off stability. Targeted preventive measures need to be taken in different production scenarios.

Extrusion & Post haul-off speedspeed matchinghaul-off slippageclamping forcehaul-off control

Q

Heat-resistant polyethylene heat-resistant polyethylene process linkage problem when switching production between different processing methods (Variant: strengthened measures)

A

Production changeover linkage needs advance planning and full preparation; the key is to clarify the differentiated requirements of different processing methods for materials. Targeted preventive measures need to be taken in different production scenarios.

Extrusion & Post production changeoverprocessing methodprocess parametersmaterial gradetrial production verification

Q

Heat-resistant polyethylene pipe longitudinal reversion rate exceeding standard (Variant: mass production scenario)

A

Excessive reversion rate is caused by large internal stress or excessive orientation, and needs to be solved from temperature control, cooling rate and haul-off speed. Targeted preventive measures need to be taken in different production scenarios.

Extrusion & Post longitudinal reversion rateinternal stresscooling ratehaul-off speedmolecular orientation

Q

Excessive shrinkage of heat-resistant polyethylene extruded products (Variant: strengthened measures)

A

Excessive shrinkage is caused by high crystallinity or high temperature, and needs to be solved by controlling temperature and cooling rate. Targeted preventive measures need to be taken in different production scenarios.

Extrusion & Post shrinkage ratecrystallinitymelt temperaturecooling ratehaul-off speed

Q

Die head pressure fluctuation of heat-resistant polyethylene extruder (Variant: strengthened measures)

A

Die head pressure fluctuation is caused by unstable output or filtration system problems, and extrusion parameters need to be stabilized and the filtration system maintained. Targeted preventive measures need to be taken in different production scenarios.

Extrusion & Post pressure fluctuationscreen packdie head temperaturebreaker plateuniform output

Q

Haul-off speed mismatch of heat-resistant polyethylene extruded products (Variant: strengthened measures)

A

Haul-off speed mismatch needs to be solved by precisely adjusting haul-off parameters and ensuring haul-off stability. Targeted preventive measures need to be taken in different production scenarios.

Extrusion & Post haul-off speedspeed matchinghaul-off slippageclamping forcehaul-off control

Q

Unstable output/surging in heat-resistant polyethylene extrusion process (Variant: mass production scenario)

A

Unstable output is caused by unstable solids conveying, and the barrel temperature and feeding system need to be optimized. Targeted preventive measures need to be taken in different production scenarios.

Extrusion & Post unstable outputsurgingsolids conveyinghopper bridgingscrew rotation speed

Q

Dimensional fluctuation of heat-resistant polyethylene extruded products (Variant: mass production scenario)

A

Dimensional fluctuation is caused by unstable extrusion or haul-off, and each process parameter needs to be systematically stabilized. Targeted preventive measures need to be taken in different production scenarios.

Extrusion & Post dimensional fluctuationscrew rotation speedhaul-off speedtemperature stabilityuniform feeding

Q

Heat-resistant polyethylene pipe longitudinal reversion rate exceeding standard (Variant: strengthened measures)

A

Excessive reversion rate is caused by large internal stress or excessive orientation, and needs to be solved from temperature control, cooling rate and haul-off speed. Targeted preventive measures need to be taken in different production scenarios.

Extrusion & Post longitudinal reversion rateinternal stresscooling ratehaul-off speedmolecular orientation

Q

Unstable output/surging in heat-resistant polyethylene extrusion process (Variant: strengthened measures)

A

Unstable output is caused by unstable solids conveying, and the barrel temperature and feeding system need to be optimized. Targeted preventive measures need to be taken in different production scenarios.

Extrusion & Post unstable outputsurgingsolids conveyinghopper bridgingscrew rotation speed

Problema y solución

Categorías

Solicitar presupuesto