Molds & Tooling
7 조회수
ABS nozzle drool
문제 현상
The nozzle drips during mold opening or waiting, and cold slug marks or stringing appear at the product gate.
원인 분석
The nozzle temperature is too high, the back pressure is too large, or the nozzle orifice is worn and enlarged, so the melt flows out by itself after plasticizing; low-viscosity grades of ABS are more prone to drooling.
해결 방법
①Reduce the nozzle temperature by 5~10℃; ②set suck-back to relieve pressure; ③replace the worn nozzle; ④use a needle valve nozzle when necessary.
핵심 요약
For drooling, first lower the nozzle temperature and add suck-back; if ineffective, replace the nozzle.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!