Extrusion & Post
5 조회수
ASA FDM bed adhesion management
문제 현상
[Problem phenomenon] ASA printing first layer adhesion poor, corners warp and detach from platform
원인 분석
ASA has relatively high shrinkage and warps easily, needs heated bed plus adhesion aids: glass bed PEI sheet Kapton tape with 3Dlac or ASA-acetone slurry; platform leveling is the prerequisite
해결 방법
Platform precisely leveled and adhesion agent used; large parts add brim or raft; bed temperature kept 90-110°C throughout; after adjustment, continuously sample to verify the effect, and resume mass production after confirming stability
핵심 요약
ASA printing adhesion relies on leveling plus adhesion agent, warping edges add brim; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for subsequent similar problems
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!