Extrusion & Post
2 visualizaciones
ASA FDM bed adhesion management
Fenómeno del problema
[Problem phenomenon] ASA printing first layer adhesion poor, corners warp and detach from platform
Análisis de la causa
ASA has relatively high shrinkage and warps easily, needs heated bed plus adhesion aids: glass bed PEI sheet Kapton tape with 3Dlac or ASA-acetone slurry; platform leveling is the prerequisite
Solución
Platform precisely leveled and adhesion agent used; large parts add brim or raft; bed temperature kept 90-110°C throughout; after adjustment, continuously sample to verify the effect, and resume mass production after confirming stability
Conclusión clave
ASA printing adhesion relies on leveling plus adhesion agent, warping edges add brim; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for subsequent similar problems
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!