Material Drying
4 조회수
ASA Bubbles and Air Pockets
문제 현상
【Problem Phenomenon】Bubbles inside ASA products, holes visible on sectioning, strength affected
원인 분석
Moisture vaporization, degradation gas generation and thick-wall shrinkage cavities are the three types of bubbles: moisture type distributed overall, degradation type accompanied by discoloration, shrinkage cavity type concentrated in thick-wall core; during on-site troubleshooting, verify item by item according to this mechanism, avoid blindly adjusting the machine based only on experience
해결 방법
Locate the cause according to bubble distribution; moisture type strengthens drying, degradation type lowers temperature and shortens residence, shrinkage cavity type strengthens holding pressure; after adjustment, continuously sample to verify the effect, and resume mass production after confirming stability
핵심 요약
ASA bubbles are classified by distribution, symptomatic treatment is effective; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for subsequent similar problems
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!