Processing Machinery
6 조회수
HDPE equipment screw
문제 현상
HDPE plasticization is uneven, unmelted particles appear in the product, and back pressure adjustment has limited effect
원인 분석
HDPE is suitable for general-purpose screws with a compression ratio of 2.0-3.0; too low a compression ratio causes insufficient plasticization, and too high causes large shear heat; back pressure only needs to ensure melt uniformity, and too high is useless
해결 방법
①Screw compression ratio 2.0-3.0; ②back pressure at the low limit to ensure uniformity; ③for poor plasticization check screw wear and temperature; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
핵심 요약
HDPE screw selection is lenient but has boundaries; a 2.0-3.0 compression ratio plus low back pressure is the standard configuration; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!