Processing Machinery
3 조회수
HDPE startup procedure
문제 현상
After starting up following a few days of shutdown, the first batch of products has degradation spots
원인 분석
The retained material from the shutdown is oxidized and mixed into the products at startup; when troubleshooting on site, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience; this mechanism has been repeatedly verified by industry data and should be confirmed first during troubleshooting
해결 방법
Empty the barrel before startup; air-shoot until the extrudate strand is normal; check the first piece; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability; change only one variable at a time and record parameter changes, to facilitate locating effective measures
핵심 요약
After a shutdown, discharge the residual material first when restarting; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar future problems
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!