Molds & Tooling
4 조회수
LCP Product Jetting Marks
문제 현상
Snake-like streaks in front of the gate.
원인 분석
LCP's low viscosity makes jetting easy at high speed; small gates and open cavities aggravate it.; during on-site troubleshooting, verify item by item according to this mechanism to avoid blindly adjusting the machine based solely on experience; this mechanism has been repeatedly verified by industry data and should be confirmed first during troubleshooting
해결 방법
①Low speed in the initial stage with multi-stage injection; ②enlarge the gate; ③adjust gate position so the melt impacts the core; ④increase mold temperature.; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
핵심 요약
Jetting marks are controlled by speed curve and gate.; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!