Molds & Tooling
7 visualizações
LCP Product Jetting Marks
Fenómeno do problema
Snake-like streaks in front of the gate.
Análise das causas
LCP's low viscosity makes jetting easy at high speed; small gates and open cavities aggravate it.; during on-site troubleshooting, verify item by item according to this mechanism to avoid blindly adjusting the machine based solely on experience; this mechanism has been repeatedly verified by industry data and should be confirmed first during troubleshooting
Solução
①Low speed in the initial stage with multi-stage injection; ②enlarge the gate; ③adjust gate position so the melt impacts the core; ④increase mold temperature.; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
Conclusão principal
Jetting marks are controlled by speed curve and gate.; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!