Extrusion & Post
4 조회수
LLDPE die gap
문제 현상
LLDPE blown film produced per the LDPE die gap, bubble unstable and severe sharkskin.
원인 분석
LLDPE melt viscosity is high and shear-sensitive, requiring a larger die gap (0.060-0.100 inches) to reduce shear; During on-site troubleshooting, verify item by item according to this mechanism, avoiding blindly adjusting the machine based only on experience.
해결 방법
LLDPE die gap configured at 1.5-2.5mm; insufficient gap aggravates shear heat and melt fracture; After adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability.
핵심 요약
LLDPE die gap must be larger than LDPE; After confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!