Molds & Tooling
4 조회수
LLDPE shrinkage rate 1.5-3%
문제 현상
Product dimensions deviate, shrinkage differs noticeably among grades of different density, molds are not interchangeable
원인 분석
LLDPE shrinkage rate 1.5-3% is lower than LDPE, giving better dimensional stability; but shrinkage still differs within the density range of 0.915-0.935g/cm³; actual shrinkage varies with molding conditions
해결 방법
①Allow shrinkage allowance of 1.5-3% in the mold; ②recalculate when changing density grade; ③correct shrinkage after mold trial for precision parts; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
핵심 요약
LLDPE's low shrinkage is its dimensional advantage; the 1.5-3% range is subdivided by density, giving a basis for mold shrinkage allowance; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!