Molds & Tooling
5 görüntüleme
LLDPE shrinkage rate 1.5-3%
Sorun Belirtisi
Product dimensions deviate, shrinkage differs noticeably among grades of different density, molds are not interchangeable
Neden Analizi
LLDPE shrinkage rate 1.5-3% is lower than LDPE, giving better dimensional stability; but shrinkage still differs within the density range of 0.915-0.935g/cm³; actual shrinkage varies with molding conditions
Çözüm
①Allow shrinkage allowance of 1.5-3% in the mold; ②recalculate when changing density grade; ③correct shrinkage after mold trial for precision parts; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
Temel Çıkarım
LLDPE's low shrinkage is its dimensional advantage; the 1.5-3% range is subdivided by density, giving a basis for mold shrinkage allowance; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!