Molds & Tooling
15 görüntüleme
Insufficient mold filling flow length
Sorun Belirtisi
Thin-wall or complex parts of PES products are incompletely filled
Neden Analizi
Barrel temperature too low <310°C causing high melt viscosity; mold temperature <120°C causes the melt front to cool rapidly
Çözüm
Increase the melt temperature to 340-370°C to reduce melt viscosity; increase the mold temperature to 140-160°C to extend the melt flow window
Temel Çıkarım
PES requires higher processing temperature and mold temperature to assist filling
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!