Injection Molding
6 조회수
PA6 '2079851475616104452 Black Specks
문제 현상
Black specks and black streaks, obvious on light-color parts.
원인 분석
Dead corner carbonization (PA carbonization is obvious at high temperature), raw material contamination; high-temperature nylon dead corner accumulated material easily carbonizes; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience.
해결 방법
①Thoroughly clean the machine to remove accumulated material in the dead corners of the barrel and hot runner;②avoid long-time high-temperature idling heat preservation of the barrel;③check the cleanliness of raw material and regrind to eliminate pollution sources;④use purging material to thoroughly replace during material change;⑤establish a regular machine cleaning and maintenance system to prevent dead corner material accumulation.
핵심 요약
PA6 black specks = 'carbonization': dead corners are the root; nylon processing temperature is high, dead corner accumulated material carbonizes quickly, and machine cleaning and maintenance must be normalized; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!