Processing Machinery
3 조회수
PA6 Residence Time Limit
문제 현상
Small parts produced on a large machine gradually yellow, performance fluctuates, and black specks increase over time
원인 분석
PA6 residence at 280°C must not exceed 4-5 minutes, and only 1-2 minutes at 310°C; a small shot volume in a large barrel causes the melt to be repeatedly heated, and degradation products are periodically released, forming black specks and yellowing
해결 방법
①Shot volume accounts for 40-80% of barrel capacity; ②switch small parts to a small machine or dedicated screw; ③purge the barrel and lower the temperature when downtime exceeds the limit; after adjustment, continuously sample to verify the effect, and resume mass production after confirming stability
핵심 요약
Residence time is the invisible red line of PA6 thermal management; the 40-80% shot proportion plus the time-limited shutdown procedure is the equipment-matching principle for preventing degradation; after confirming effectiveness, fix the parameters and practices into the work instructions to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!