Processing Machinery
5 مشاهدة
PA6 Residence Time Limit
ظاهرة المشكلة
Small parts produced on a large machine gradually yellow, performance fluctuates, and black specks increase over time
تحليل الأسباب
PA6 residence at 280°C must not exceed 4-5 minutes, and only 1-2 minutes at 310°C; a small shot volume in a large barrel causes the melt to be repeatedly heated, and degradation products are periodically released, forming black specks and yellowing
الحل
①Shot volume accounts for 40-80% of barrel capacity; ②switch small parts to a small machine or dedicated screw; ③purge the barrel and lower the temperature when downtime exceeds the limit; after adjustment, continuously sample to verify the effect, and resume mass production after confirming stability
الخلاصة الأساسية
Residence time is the invisible red line of PA6 thermal management; the 40-80% shot proportion plus the time-limited shutdown procedure is the equipment-matching principle for preventing degradation; after confirming effectiveness, fix the parameters and practices into the work instructions to prevent recurrence
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!