Molds & Tooling
3 조회수
PA6 Melt Temperature Upper Limit 280
문제 현상
To improve filling, the melt temperature is raised to 290°C, and the products become brittle and yellow at the gate
원인 분석
After PA6 melt temperature exceeds 280°C, the thermal degradation rate increases significantly, molecular chain breakage causes the molecular weight to decrease, manifested as reduced impact strength, yellowing color, and discoloration near the gate first
해결 방법
PA6 melt temperature is controlled at 240-270°C, with a maximum not exceeding 280°C; insufficient filling is preferably solved by increasing the injection speed, mold temperature, or improving the gate, and cannot be solved by exceeding the temperature
핵심 요약
280°C is the red line for PA6 melt temperature; the cost of improving flowability by exceeding the temperature is degradation; after confirming effectiveness, fix the parameters and practices into the work instructions to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!