Molds & Tooling
6 visualizações
PA6 Melt Temperature Upper Limit 280
Fenómeno do problema
To improve filling, the melt temperature is raised to 290°C, and the products become brittle and yellow at the gate
Análise das causas
After PA6 melt temperature exceeds 280°C, the thermal degradation rate increases significantly, molecular chain breakage causes the molecular weight to decrease, manifested as reduced impact strength, yellowing color, and discoloration near the gate first
Solução
PA6 melt temperature is controlled at 240-270°C, with a maximum not exceeding 280°C; insufficient filling is preferably solved by increasing the injection speed, mold temperature, or improving the gate, and cannot be solved by exceeding the temperature
Conclusão principal
280°C is the red line for PA6 melt temperature; the cost of improving flowability by exceeding the temperature is degradation; after confirming effectiveness, fix the parameters and practices into the work instructions to prevent recurrence
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!