Injection Molding
6 조회수
PBAT '2079851475616104452 warpage
문제 현상
PBAT injection molded products warp and deform, with uneven crystallization and internal stress acting together.
원인 분석
PBAT crystallization rate is slow; uneven cooling causes shrinkage differences; improper holding pressure causes internal stress; uneven wall thickness; high demolding temperature.; when troubleshooting on site, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience
해결 방법
①Uniform control of mold temperature; ②optimize holding pressure curve; ③uniform wall thickness design; ④sufficient cooling time; ⑤annealing treatment.; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
핵심 요약
Cooling uniformity is the core of PBAT warpage; holding pressure and structure are equally important; annealing is a post-treatment option.; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!