Material Drying
4 조회수
PBT product bubbles (degradation)
문제 현상
Bubbles still exist after full drying, reduced after lowering temperature.
원인 분석
Excessive melt temperature or too long residence causes PBT thermal degradation gas generation; shear overheating also produces it.; when troubleshooting on site, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience
해결 방법
①Lower melt temperature; ②shorten residence time; ③reduce screw speed; ④clean the barrel.; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
핵심 요약
Distinguish moisture and degradation for bubbles; if drying is ineffective, check the temperature history.; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar problems in the future
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!