Material Drying
6 مشاهدة
PBT product bubbles (degradation)
ظاهرة المشكلة
Bubbles still exist after full drying, reduced after lowering temperature.
تحليل الأسباب
Excessive melt temperature or too long residence causes PBT thermal degradation gas generation; shear overheating also produces it.; when troubleshooting on site, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience
الحل
①Lower melt temperature; ②shorten residence time; ③reduce screw speed; ④clean the barrel.; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
الخلاصة الأساسية
Distinguish moisture and degradation for bubbles; if drying is ineffective, check the temperature history.; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar problems in the future
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!