Molds & Tooling
3 조회수
PC/ABS warpage
문제 현상
Parts warp and deform after demolding.
원인 분석
Uneven cooling causes inconsistent shrinkage; low mold temperature or insufficient cooling time both aggravate warpage.; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based on experience alone
해결 방법
①Raise mold temperature; ②extend cooling time; ③balance cooling water channels; ④optimize gate position.; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
핵심 요약
PC/ABS warpage relies on mold temperature and cooling management; uniform cooling is the core.; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!