Molds & Tooling
5 مشاهدة
PC/ABS warpage
ظاهرة المشكلة
Parts warp and deform after demolding.
تحليل الأسباب
Uneven cooling causes inconsistent shrinkage; low mold temperature or insufficient cooling time both aggravate warpage.; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based on experience alone
الحل
①Raise mold temperature; ②extend cooling time; ③balance cooling water channels; ④optimize gate position.; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
الخلاصة الأساسية
PC/ABS warpage relies on mold temperature and cooling management; uniform cooling is the core.; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!