Injection Molding
6 조회수
PCABS Warpage and Deformation
문제 현상
PC/ABS warpage is caused by improper design, gate, and processing conditions, with internal stress and uneven shrinkage.
원인 분석
PC/ABS warpage and deformation are usually caused by unreasonable part design, improper gate position, and inappropriate '2079851475616104452 processing conditions; internal stress inside; uneven or excessive shrinkage; thin-walled, narrow, long panels shrink differently in transverse and longitudinal directions after high and low temperature cycles.
해결 방법
①Design rationality review; ②gate position optimization; ③processing condition adjustment; ④internal stress management; ⑤high and low temperature cycle verification.; after adjustment, continuously sample to verify the effect, and resume mass production after confirming stability
핵심 요약
The three elements of PCABS warpage are design, gate, and process; internal stress and shrinkage are the mechanism; cycle verification exposes problems.; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!