Material Drying
4 조회수
PC Transparent Part Haze
문제 현상
[Problem Phenomenon] PC transparent parts are hazy and turbid, and the optics do not meet the standard
원인 분석
Moisture, shear stress, degradation, mold surface and uneven cooling all cause haze; transparent parts are extremely sensitive to the process; when troubleshooting on site, verify each item according to this mechanism one by one, and avoid blindly adjusting the machine based on experience alone
해결 방법
Stricter drying; low shear; high mold polishing; uniform cooling; check degradation; after adjustment, take samples continuously to verify the effect, and resume mass production only after confirming stability; change only one variable at a time and record parameter changes, so as to locate effective measures
핵심 요약
For PC transparent part haze, check moisture, shear and degradation, with zero tolerance for the process; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!