Material Drying
8 visualizaciones
PC Transparent Part Haze
Fenómeno del problema
[Problem Phenomenon] PC transparent parts are hazy and turbid, and the optics do not meet the standard
Análisis de la causa
Moisture, shear stress, degradation, mold surface and uneven cooling all cause haze; transparent parts are extremely sensitive to the process; when troubleshooting on site, verify each item according to this mechanism one by one, and avoid blindly adjusting the machine based on experience alone
Solución
Stricter drying; low shear; high mold polishing; uniform cooling; check degradation; after adjustment, take samples continuously to verify the effect, and resume mass production only after confirming stability; change only one variable at a time and record parameter changes, so as to locate effective measures
Conclusión clave
For PC transparent part haze, check moisture, shear and degradation, with zero tolerance for the process; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!