Processing Machinery
6 조회수
PC Assembly Stress Cracking
문제 현상
[Problem Phenomenon] PC cracks after screws are over-tightened or press-fitted during assembly
원인 분석
Assembly stress superimposed with internal stress exceeds the material strength; excessive screw torque and press-fit interference are common causes; when troubleshooting on site, verify each item according to this mechanism one by one, and avoid blindly adjusting the machine based on experience alone
해결 방법
Control the assembly torque and interference; use metal inserts to disperse the stress; assemble annealed parts; after adjustment, take samples continuously to verify the effect, and resume mass production only after confirming stability; change only one variable at a time and record parameter changes, so as to locate effective measures
핵심 요약
PC assembly cracking is stress superposition; torque and interference must be controlled; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!