Processing Machinery
2 مشاهدة
PC Assembly Stress Cracking
ظاهرة المشكلة
[Problem Phenomenon] PC cracks after screws are over-tightened or press-fitted during assembly
تحليل الأسباب
Assembly stress superimposed with internal stress exceeds the material strength; excessive screw torque and press-fit interference are common causes; when troubleshooting on site, verify each item according to this mechanism one by one, and avoid blindly adjusting the machine based on experience alone
الحل
Control the assembly torque and interference; use metal inserts to disperse the stress; assemble annealed parts; after adjustment, take samples continuously to verify the effect, and resume mass production only after confirming stability; change only one variable at a time and record parameter changes, so as to locate effective measures
الخلاصة الأساسية
PC assembly cracking is stress superposition; torque and interference must be controlled; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!