Material Drying
3 조회수
PLA High-Temperature Processing 50ppm
문제 현상
PLA products processed at high temperature or with long residence become more severely brittle; the same drying conditions fail
원인 분석
When the processing temperature is higher than 240℃ or the residence time is long, the hydrolysis degradation window is wider, and the moisture requirement tightens from 100ppm to below 50ppm to avoid a decrease in number-average molecular weight
해결 방법
①For high-temperature processes, tighten the drying standard to 50ppm; ②Shorten the melt residence time; ③Re-evaluate the drying capacity for processes exceeding 240℃; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
핵심 요약
PLA's moisture red line tightens with temperature; processes above 240℃ must implement 50ppm-level ultra-strict drying; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!